Konica Minolta PagePro 1250W. User Manual page 84

9
Clearing a media jam in the lower feeder unit (Tray 2)
1
Slide the tray out of the lower feeder
unit.
2
Remove any folded or misfed media
from the inside of the lower feeder
unit.
3
Remove the tray cover and any media in the tray.
4
Carefully pull the misfed media out of the tray.
5
Reload the media in the tray.
Make sure the paper is evenly
aligned and that the top sheet is
below the maximum paper
mark.
Do not reload curled or wrinkled
media.
6
Replace the tray cover and insert the tray into the lower feeder unit.
7
Open the printer's top cover and close it again in order to reset the
printer.
Printing automatically restarts from the page that was misfed.
9-6
Troubleshooting