Dell 5130cn Service Manual page 96

- CLUTCH Z34 (PL 14.5.25)
A clutch that transmits the torque from the MOTOR ASSY EJECT to the SET CLAMP (SHAFT
ASSY SET CLAMP: PL 14.6.32).
- GEAR ASSY SECTOR A4 (PL 14.5.18)
Controls the movement of the GUIDE PAPER 240 by changing the transmission route from the
MOTOR ASSY EJECT. (Refer to 4. Torque Transmission Route.)
Stacker Height Sensor2
GEAR ASSY SECTOR A4
Eject Clamp
Home Sensor
Set Clamp
Home Sensor
MOTOR ASSY
EJECT
Stacker No Paper
Sensor
MOTOR ASSY
STACKER
Finisher Service Manual
Version 1 2009.03.31
Stacker Height Sensor1
6 – 27
Chapter 6 Principles of Operation
CLUTCH Z34
Tbt06118KA