Dell 5130cn Service Manual page 30

Removal 5 COVER ASSY FRONT (PL14.3.5)
In the following steps, the details of Steps 1 and 2 are omitted because they are described earlier in this
chapter. Go to the steps in parentheses to execute the necessary steps, and then go to Step 3 onward.
1) Remove the TRAY STACKER. (Removal 1)
2) Remove the FINISHER ASSY. (Removal 2)
3)-2
3) Remove the COVER GUIDE TRAY (PL14.1.3) from FINISHER ASSY by releasing the two hooks
on the COVER GUIDE TRAY.
Continues to the next page.
Finisher Service Manual
Version 2 2009.06.10
3)-1
3)-1
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 16
Tbt03508KB