Feeding In X' Port - Dell 5130cn Service Manual

2.4 Feeding in X' port

The sheet coming in from the H-TRA is fed to the Compile Tray by the ROLL ASSY DRIVE ENT (PL
14.7.11) and the ROLL ASSY DRIVE EXIT (PL 14.7.12) rotatably driven by the DRIVE ASSY TRANS
(PL 14.7.16) via the Belt.
The passage of the sheet is detected by the COMPILE EXIT SENSOR (PL 14.7.9). (No paper: Sensor
beam blocked. Refer to 3.2.1 Major Components and Their Functions.)
ROLL ASSY DRIVE EXIT
Finisher Service Manual
Version 2 2009.06.10
Compile Exit Sensor
From H-TRA
ROLL ASSY DRIVE ENT
To Compile Tray
DRIVE ASSY TRANS
6 – 5
Chapter 6 Principles of Operation
Belt
Tbt06104KA