Replacement 10 KIT FINISHER ASSY (PL14.1.99)
2)
Secure the HARNESS ASSY IF A4FIN to the printer with the clamp.
3)
Engage the connectors (P121/CN4) of the HARNESS ASSY IF A4FIN to the printer.
4)
Secure the harness of the TRANSPORT ASSY A4 to the FINISHER ASSY with the clamp.
5)
Engage the connectors (P/J8987) of the TRANSPORT ASSY A4 to the FINISHER ASSY.
Continues to the next page.
Finisher Service Manual
Version 3 2009.07.03
Chapter 3 Removal and Replacement Procedures (RRPs)
4)
5)
3)
2)
3 - 43
Tbt03533KB