Replacement 2
1)-2
1)-2
1)
Replace the COVER REAR to the FINISHER ASSY, and then secure with the four screws (silver,
flanged, 8mm).
2)
Secure the HARNESS ASSY IF A4FIN to the COVER REAR with the clamp.
Go to the next replacement step:
Replacement 10 KIT FINISHER ASSY (PL14.1.99)
Finisher Service Manual
Version 3 2009.07.03
COVER REAR (PL14.3.3)
1)-2
1)-2
2)
Chapter 3 Removal and Replacement Procedures (RRPs)
1)-1
3 - 29
Tbt03520KB