3.3.2.3 Sheet/Envelope Select Lever
The Sheet/Envelope Select Lever can be switched to the "Sheet Mode" or "Envelope Mode" position
depending on the print media to be used.
In the "Sheet Mode", the sheet exits to the Stacker Tray without contacting the Select Lever.
Stacker Tray
(Sheet Mode Position)
In the "Envelope Mode", the envelope is corrugated along the feeding direction by the projection from
the Select Lever. This corrugation increases the rigidity of the envelope, thereby preventing the lead
edge from slipping underneath the flap of the previous envelope.
Meanwhile, the Stacker Tray lowers slightly from the normal position to ensure that the envelopes are
stacked up neatly.
Finisher Service Manual
Version 2 2009.06.10
Paper
6 – 14
Chapter 6 Principles of Operation
Sheet/Envelope Select Lever
(Sheet Mode)
Paper
Tbt06132KA