Dell 5130cn Service Manual page 35

Removal 8 BRACKET ASSY INTERLOCK (PL14.10.1)
In the following steps, the details of Steps 1 through 3 are omitted because they are described earlier in
this chapter. Go to the steps in parentheses to execute the necessary steps, and then go to Step 4
onward.
1) Remove the TRAY STACKER. (Removal 1)
2) Remove the FINISHER ASSY. (Removal 2)
3) Remove the COVER ASSY FRONT. (Removal 5)
5)
4) Disengage the connectors (P/J8889) of the SWITCH (PL14.10.13).
5) Remove the two screws (silver, flanged, 6mm) that fix the BRACKET ASSY INTERLOCK
(PL14.10.1) to the FINISHER ASSY.
6) Remove the BRACKET ASSY INTERLOCK from the FINISHER ASSY.
Finisher Service Manual
Version 1 2009.03.31
Chapter 3 Removal and Replacement Procedures (RRPs)
6)
5)
4)
3 - 21
Tbt03513KA