General Notes - Dell 5130cn Service Manual

1.2 General Notes

- The string "(PL X.Y.Z)" appended to the part name in the procedure denotes that the part correto the
plate (PL) "X.Y", item "Z" of the Engineering Parts list, and its shape and fitting position can be
checked in the Engineering Parts list.
- Directional descriptions used in the procedures are defined as follows:
-Front : Direction toward you when facing the front of the printer.
-Rear : Direction opposite to the front when facing the front of the printer.
-Left : Left-hand direction when facing the front of the printer.
-Right : Right-hand direction when facing the front of the printer.
Fig.: Directions Regarding the Printer
- The string "(RRP X.Y)" that appears in or at the end of the procedure denotes that the related ser-
vice procedure is described in [RRP X.Y].
- Unless otherwise specified, use a Phillips-head screwdriver to remove the screws shown in the illus.
- Black arrows shown in the illustrations denote moving directions. The numbers assigned to these
arrows refer to the order in the procedure.
- Refer to [Chapter 4 Plug/Jack (P/J) Connector Locations] for the positions of connectors (P/J).
Finisher Service Manual
Version 2 2009.06.10
Chapter 3 Removal and Replacement Procedures (RRPs)
3 - 2
Tbt03500KB