Overview; Configuration - Dell 5130cn Service Manual

1. Overview

The Finisher is a device that finishes the sheets ejected by the Printer with post-processing such as
stapling, sorting, and stacking, and then deposits them in its Stacker Tray.

1.1 Configuration

The Finisher consists of the following blocks:
- Horizontal Transport (hereinafter, H-TRA)
Relays the sheets ejected from the Printer to the Finisher.
- Compile Tray
Aligns the sheets.
- Stapler
Staples the sheets in the specified position.
- Stacker Tray
Holds the sheets ejected.
Stacker Tray
Finisher Assy
Finisher Service Manual
Version 1 2009.03.31
Compile Tray
Stapler
6 – 1
Chapter 6 Principles of Operation
H-TRA
Tbt06100KA