Replacement 5
2)
When performing the following steps, use caution not to drop the HOLDER ASSY STA-
PLER A4.
1)
Fit the notch of the HOLDER ASSY STAPLER A4 with the loosened screws, and then mate the
two holes of the HOLDER ASSY STAPLER A4 with the bosses of the FINISHER ASSY.
2)
Secure the HOLDER ASSY STAPLER A4 to the FINISHER ASSY with the two screws (silver,
flanged, 6mm).
3)
Engage the two sets of connectors (P/J8886, 8887) of the HOLDER ASSY STAPLER A4.
Go to the next replacement step:
Replacement 7 COVER ASSY FRONT (PL14.3.5)
Finisher Service Manual
Version 3 2009.07.03
HOLDER ASSY STAPLER A4 (PL14.8.19)
3)
Chapter 3 Removal and Replacement Procedures (RRPs)
1)
3 - 33
2)
Tbt03524KB