Conducting Calls With Several Parties; Call Waiting; Enquiry Call; Call Transfer (Switching) - elmeg CS410 Operating Instructions Manual

Conducting calls with several parties

Call waiting

If, during an ongoing call, a second call comes in for you, the second call is signaled when
"Call waiting on" is set (see page 67).
waiting call
g
(250 subscri-
bers 2)
Call with subscri-
ber 1
You can take a waiting caller, reject the call, or switch to a different subscriber. You
can not transfer any calls if you already have four calls on your phone.

Enquiry Call

You have the option of establishing up to three other connections during an ongoing call
using the enquiry call feature. You can also use the MSN assignment key, a line key or an ex-
tension key to initiate an enquiry connection.
R
g
Call with sub- Party 1 is put on
scriber hold
If you wish to set up further connections, proceed as described above.
An active connection can be terminated by pressing the key for ending a call. You can return
to the call that was previously put on hold. If there are no other calls on hold, a new connecti-
on can then be set up.

Call transfer (switching)

When a call is transferred, the active subscriber and the subscriber for the connection previ-
ously put on hold are always connected with one another.
You can initiate an enquiry call yourself (e. g. in order to announce the call) and can then
transfer the call.
R
g
Call with sub- Party 1 is put
scriber 1 on hold
Kommunikationstechnik
s
accept
t g
Call with sub-
Dial number
scriber 2
t g
Call with sub-
Dial number
scriber 2
Making telephone calls
g
Call with subscriber 2;
Party 1 is put on hold
s
transfer
27