Table of Contents
Advertisement
lied with the system to the bottom of your telephone (7). Then, route the headset cord under
the cord holder.
Headset socket assignments
Figure 3
Further settings when using a headset
You can use the handset or the headset for making calls. With headset operation, the follo-
wing settings are required or possible:
•
When configuring your telephone, program one of the function keys for headset ope-
ration (headset button, see page 51).
•
You can use the headset connected to your system automatically for certain actions
on the phone (see page 71).
•
If a special support feature is stored in your telephone for the headset your are using,
set your phone for that headset model.
For example, the LED in the microphone extension for »Firefly F142 N« from Plantro-
nics can be activated by the telephone.
•
If you would like to use the auto-answer feature with your headset, set the time after
which a call is answered (see page 71). When configuring your telephone, you should
program a function key to be used for activating or deactivating the auto-answer fea-
ture.
Connecting the telephone to a PC
Connecting the PC connection cord (USB)
Use the USB cord supplied with the system to connect the telephone to the PC, or
to the hub. If you use a different USB cord, ensure that the distance between the
telephone and the PC, or between the telephone and the hub, does not exceed
five meters, depending on the type of cord you are using.
Connect the USB cord (4) as shown in figure 4 (PC-socket). Plug the USB connector (type A)
into the corresponding socket of your PC and the USB connector (type B) into the USB so-
cket on the back of the telephone (1). The telephone is automatically detected by the PC,
provided that both devices (telephone and PC) are switched on.
6
8 - DSHG-transmitter
8
7 - V+ (3.3V)
7
6 - Microphone - (Ground)
6
5 - Handset (3.3V, switchable via resistor)
5
4 - Handset (Ground)
4
3 - Microphone +
3
2
2 - Ground (Ground)
1
1 - DSHG-receiver
Description and Installation
Advertisement
Table of Contents
