■ Charger (Station)
Power lamp
(Red)
■ VIRTUAL GUARD
Distance Detection Sensor
■ Installing the batteries
Batteries are not supplied with the product. You have to purchase the batteries separately. Install
the alkaline batteries (type D) before use.
1
Lift the cover of the VIRTUAL
GUARD while pressing the
locking tab.
Charging lamp (Green)
Charging
terminals
Front
Lamp
2
Install the batteries into the
VIRTUAL GUARD as shown
by the figure below. (If the
batteries are installed with
the incorrect polarity, the
VIRTUAL GUARD will not
work.)
Cord winder
Power Button
Main Body Detection Sensor
After inserting the tip of the
cover into the slot, push the
other end to close it until it
clicks into place.
❈ Specification: Alkaline Type D (LR20) batteries
Back
3
assembling _17