Installing The Batteries - Samsung SR8855 Instrukcja Obs?Ugi

Assembling the cleaner
NAME OF EACH PART
Charging Lamp
Charge Pin
Mode/Power Button
Distance Control

Installing the batteries

■
Batteries are not supplied with the product. You have to purchase the batteries additionally.
Install the alkaline batteries (type D) before use.
1
Lift the cover of the
VIRTUAL GUARD while
pressing the locking tab.
[ Charger (Station) ]
[ VIRTUAL GUARD ]
Mode Lamp
Switch
2
Install the batteries into the
VIRTUAL GUARD as shown
by the figure below. (If the
batteries are installed with
the incorrect polarity, the
VIRTUAL GUARD will not work.)
Power
Lamp
Distance Detection
Sensor
Main Body Detection
Sensor
3
After inserting the tip of
the cover into the slot,
push the other end to
close it until it clicks into
place.
✽ Specification: Alkaline Type D (LR20) batteries
Assembling the cleaner _17
Remote Control
Holder
Vents
Catching Sill