Troubleshooting; Checklist Before Svc Calls - Samsung SR10F71U series User Manual

Vacuum cleaning robot

Hide thumbs

Table Of Contents

Table of Contents

troubleshooting

CHECKLIST BEFORE SVC CALLS

Symptom

Vacuum cleaning

robot does not

operate at all before

cleaning.

Vacuum cleaning

robot stopped

operating while

cleaning.

The suction power is

weak while cleaning.

Checklist

• Is the dust bin assembled?

• Is the Power Switch turned on?

• Is cleaning mode

panel turned on?

• Is the battery level flashing only

one level and is 'Lo' displayed in

the display panel?

• Vacuum cleaning robot will not

operate when the battery in the

remote control is depleted.

• Is the battery level flashing only

one level and is 'Lo' displayed in

the display panel?

• Has the vacuum cleaning robot

become hooked on wires on the

floor?

• Is the vacuum cleaning robot stuck

to the floor where there is a height

difference?

- The driving wheel is lifted.

• Is there a thin towel (cloth)

wrapped around the driving wheel?

• Is the vacuum cleaning robot stuck

on the doorsill?

• Check whether the dust bin is full

of dust.

• Check whether the suction inlet is

clogged by foreign substances.

• Check whether the filter is clogged. • Clean the filter well.

• Install the dust bin.

• Turn on the Power Switch.

• Press the

in the display

off, press and hold the

down for 3 seconds or longer.)

• Lift up the vacuum cleaning robot,

and manually dock the vacuum

cleaning robot onto the charger to

charge it.

• Replace the batteries in the remote

control. (AAA type)

• Lift up the vacuum cleaning robot,

manually dock the robot onto the

charger to charge it.