Samsung SR10F71U series User Manual page 14

AUTO CHARGING
EDGE-CLEANING SIDE ROTATING BRUSH
DOORSILL CROSSING
Stair type
AVOIDING OBSTACLES
ANTI-FALLING
SAFETY DEVICE
stop
DYNAMIC SIDE BRUSH
14_ product features
When the battery is low, the vacuum cleaning robot is
automatically guided to the charger to enable it to perform a
quick auto charge.
The edge-cleaning side rotating brush cleans dust from the
edges.
The vacuum cleaning robot innovative driving system makes
it possible for it to cross over doorsills with a height of about
About 1cm
1cm and clean all rooms. The vacuum cleaning robot may not
be able to pass a 1cm doorsill depending on the shape of the
Vertical type
doorsill.
When the vacuum cleaning robot encounters an obstacle while
cleaning, the obstacle sensor allows the cleaner to avoid it and
continue cleaning. (It may happen that the cleaner touches thin
or fine obstacles.)
The 3 Cliff sensors detect downward steps such as stairs or
the front door threshold to prevent vacuum cleaning robot from
falling down stairs.
When the vacuum cleaning robot is lifted up while cleaning,
the driving wheels, power brush, suction motor, and side
rotating brush are stopped autonati(all) by sensor.
When the cleaning robot detects an obstacle, the Dynamic
Side Brushes operate. (For a better cleaning result, if a far-away
obstacle is detected, the Dynamic Side Brush on the side of
the detected obstacle starts to operate first and then as the
cleaning robot turns, the Dynamic Side Brush on the other side
starts to operate.)