Samsung SR10F71U series User Manual page 40

4. After a cleaning run, first fix the side of the power brush
opposite to the Power Switch and then fix the other side.
5. Insert the side into the two grooves and assemble it by
slightly sliding it down until it clicks into place.
• To prevent the vacuum cleaning robot from becoming clogged, be careful not to vacuum tooth
picks or cotton swabs.
CAUTION
• When removing foreign substances becomes difficult, contact a customer care center.
• Because the power brush vacuums the dust on the floor, long strings or hair can become
wrapped around the brush. Check and clean the power brush regularly.
40_ maintain