Cleaning The Dust Bin And The Filters - Samsung SR10F71U series User Manual

Cleaning the Dust Bin and the Filters

First, empty the dust bin before cleaning it.
■ When separating the dust bin, take care not to spill the dust out of the
dust bin.
■ Empty the dust bin in the following cases.
1. When dust has accumulated inside the dust bin.
2. When the suction power suddenly becomes weak.
3. When the noise suddenly increases.
1. Press the Dust Bin Eject (PUSH) button and pull the dust bin to
separate the dust bin.
2. Separate the dust bin cover by pulling it in the direction of the arrow
in the figure.
3. Remove the filter and the mesh filter from the dustbin.
4. Shake the dust from the filter, Mesh filter and dustbin.
❈ You can clean it with water.
After cleaning it with water :
1. Dustbin : Wipe the water off completely.
NOTE
2. Filter, Mesh filter : Dry them completely and then
reassemble them.
5. Reassemble the filter and mesh filter onto the dustbin.
- Assemble the mesh filter while the grid side is facing
downward. If the orientation is not correct, you will not be
able to assemble it.
If the dustbin is assembled without the filter being mounted, the error code C08 occurs.
Make sure to mount the filter.
CAUTION
6. Close the dust bin cover and install it into the main unit.
38_ maintain
Filter
Mesh filter