■ Charger (Station)
Power lamp
(red)
■ VIRTUAL GUARD
Distance Detection Sensor
■ Installing the batteries
Batteries are not supplied with the product. You have to purchase the batteries separately.
Install the batteries (type D) before use.
1
Lift the cover of the VIRTUAL
GUARD while pressing the
locking tab.
18_ assembling
Charging lamp (green)
Charging terminals
Front
Lamp
2
Install the batteries into the
VIRTUAL GUARD as shown
by the figure below. (If the
batteries are installed with
the incorrect polarity, the
VIRTUAL GUARD will not
work.)
Cord winder
Back
Power Button
Main Body Detection Sensor
3
After inserting the tip of the
cover into the slot, push the
other end to close it until it
clicks into place.
❈ Specification: Type D (LR20) batteries