Installing The Virtual Guard; Button Operations; Forming A Fence - Samsung SR10F71U series User Manual

Installing the VIRTUAL GUARD

You can confine the vacuum cleaning robot to a
particular section by using Fence (virtual wall) mode.
Forming a Fence (virtual wall)
VIRTUAL GUARD creates an invisible barrier that the vacuum
cleaning robot cannot cross.
E.g. in front of pots, furniture, the front door, and so on.
1. Turn the Fence (virtual wall) mode on using the Power
button.
- The mode lamp flashes red.
2. Install the VIRTUAL GUARD in front of the area you
want to block access from the vacuum cleaning robot.
- Install the VIRTUAL GUARD so that the distance detection
sensor can form an invisible barrier that the vacuum cleaning robot cannot cross.

Button operations

1. Lamp operations
- Fence (virtual wall) Mode: The red lamp flashes.
- Off :The lamp is turned off.
2. Turn the Power Button on
- Whenever you press the Power button, Fence (virtual wall)
mode ➝ Power off is selected in this sequence.
❈ The distance of virtual wall is 2.5m at minimum and may
differ depending on surroundings and movement status of
the robot.
Lamp
Distance
Detection
Sensor
A fence (virtual wall)
is formed.
Power Button
Main Body
Detection
Sensor
Distance
Sensor
operating _25