Using The Vacuum Cleaning Robot; Starting/Stopping Cleaning - Samsung SR10F71U series User Manual

USING THE VACUUM CLEANING ROBOT

Starting/Stopping Cleaning

You can run or stop all vacuum cleaning robot functions.
■ Each vacuum cleaning robot function only runs when the
Power Switch is turned on.
■ When the vacuum cleaning robot is operating, press the
button to cancel the operation and select a function.
Turning the power on or off
Turning the power on
- Main unit: Press the
Turning the power off
- Remote control: Press the
- Main unit: Press and hold the
❈ If no key is pressed for approximately 1 minute after turning the power
on, the power is automatically cut to prevent the battery discharging.
To turn the power on again, press and hold the power (
the main body.
Starting or stopping cleaning
Starting
- Remote control : Press the Auto, Spot, Max, Manual button.
- Main unit : Select Auto, Spot, Max mode by using the
and then pressing the
- When cleaning begins, the vacuum cleaning robot starts to move.
❈ Pressing the
perform the Auto mode cleaning.
Stopping
- To stop, press the
- When cleaning is stopped, the vacuum cleaning robot stops.
button.
button.
button down for 3 seconds.
button.
button without selecting cleaning mode starts to
remote control or main unit button.
) button on
Using the remote
control
button
Using the main unit
buttons
operating _27