Fan Impeller - Miele Touchtronic T1302 Technical Information

T1302, T1303, T1322, T1329ci, T1323c,
T1403 and T1405 Clothes Dryers
4.2 V-Belt - Removal
1. Remove the right Side Panel (010 4.4)
2. Refer to Figure 040-1.
3. Unclip the tensioning spring (2).
4. Loosen the bolts (1 and 4), and remove the V-belt.
4.3 Intermediate Drive - Removal
1. Remove the Drum Drive Belt (040 4.1)
2. Remove the V-Belt (040 4.2)
3. Remove the bolts (1 and 4), and remove the intermediate drive.
4.4 Fan Impeller (Vented Models) – Removal
1. Remove the right Side Panel (010 4.4)
2. Remove the access cover from the Fill Ring. (050 4.1)
3. Hold the Fan Impeller and remove the 10 mm bolt from the
center of the Fan Impeller
4. Remove the Fan Impeller from the shaft.
4.5 Drive Motor (Vented Models) - Removal
1. Remove the right Side Panel (010 4.4).
2. Remove the access cover from the drum support housing.
3. Remove the Fan Impeller (040 4.4).
4. Remove the Ducting – as necessary.
5. Remove the Drive Belt (040 4.1)
6. Disconnect the drive motor connections.
7. Refer to Figure 040-1. Remove the two mounting screws (6).
8. Turn the motor bracket slightly counterclockwise and lift it from
the appliance.
41
Technical Information