Technical Information Date: June 7, 2004 To: Technical Service Subject: Washer/Dryer Stand W1113, 1119, 1203, 1213, 1215 T1302, 1303, 1322C, 1323C, 1329C, 1403, 1405...
Remove the rear panel screws (Torx T20) and remove the rear panel, see Fig. 3 Leveling The stands must be leveled prior to installing the washer and dryer. Place the stands into their locations see Fig4. Adjust the feet until the stands are level. Tighten the counter nuts.
Install the dryer stand rear panel using the 4 Torx screws provided see Fig. 3. • Place the dryer into its final position being sure to line up the studs of the rubber bushings with the holes on the dryer stand.