Miele Touchtronic T1302 Technical Information
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dryer
  5. VENTED DRYER T 1302
  6. Technical information

Miele Touchtronic T1302 Technical Information

Touchtronic clothes dryers
Hide thumbs Also See for Touchtronic T1302:
Table of Contents

Advertisement

Quick Links

TECHNICAL INFORMATION

Touchtronic Clothes Dryers
Includes: T1302, T1303, T1322, T1329ci
T1403 & T1405
© 2004 Miele

Advertisement

Table of Contents
loading

Related Manuals for Miele Touchtronic T1302

Summary of Contents for Miele Touchtronic T1302

  • Page 1: Technical Information

    TECHNICAL INFORMATION Touchtronic Clothes Dryers Includes: T1302, T1303, T1322, T1329ci T1403 & T1405 © 2004 Miele...
  • Page 2 This page intentionally left blank.

  • Page 3: Table Of Contents

    Table of Contents GENERAL INFORMATION A. Warning and Safety Instructions B. Modification History C. Technical Data D. Layout of Electrical Components Vented Models Condenser Models 010 – Cabinet and Front Panel Technical Data Function Fault Repair Service 4.1 Lid – Removal 4.2 Plinth (Toekick) –...
  • Page 4 030 – Drum, Rear Bearing, Sensor and Heater Bank Technical Data 1.1 Heater Bank (NTC) Temperature Sensor – Resistance Values Function 2.1 Residual Moisture Sensor System 2.1.1 Residual Moisture Sensing – Drum Assembly 2.1.2 Residual Moisture Sensor – Brush Assembly 2.2 Drum Bearing 2.3 Heating 2.3.1 Heater Bank...
  • Page 5 040 – Drive and Fan Motor Technical Data Function 2.1 Main Motor Fault Repair Service 4.1 Drum Drive Belt – Removal 4.2 V-Belt – Removal 4.3 Intermediate Drive – Removal 4.4 Fan Impeller 4.5 Drive Motor – Removal 050 – Air Circulation and Front Bearing Technical Data 1.1 Temperature Sensor (Fan Housing) –...
  • Page 6 060 – Fascia Panel and Electrical Components Technical Data Function 2.1 Heater Relays Fault Repair 3.1 Fault Summary Service 4.1 Programming Mode 4.2 Demonstration Mode (Dealer Displays) 4.3 Service Mode 4.4 Fascia Panel – Removal 4.5 Electronic / Controls – Service Position...
  • Page 7 Touchtronic Clothes Dryers - List of Figures D-1 Layout of Components – Vented Models D-2 Layout of Components – Condenser Models 010-1 Cabinet Construction 010-2 Support bracket 020-1 Removing the outer door panel 020-2 Door Lock 030-1 Drum Bearing 030-2 Drum Rib Hardware 030-3 Drum Bearing 030-4 Heater Bank Components 030-5 Wiring Harness Holder...
  • Page 8 Touchtronic Clothes Dryers - List of Tables C-1 Overview of Models C-2 Electrical Information 030-1 Heater Bank NTC Temperature Sensor Values 030-2 Heater Element Activation 050-1 Fill Ring NTC Temperature Sensor Values 060-1 Fault Summary 060-2 Program Mode Positions 060-3 Service Mode (1 of 4) 060-4 Service Mode (2 of 4 060-5 Service Mode (3 of 4) 060-6 Service Mode (4 of 4)

  • Page 9: General Information

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information General Information...
  • Page 10 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information This page intentionally left blank.

  • Page 11: Warning And Safety Instructions

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Warning and Safety Instructions General Information Service of this appliance should only be performed by qualified personnel; in accordance with local and national codes. Power should be disconnected from the appliance during service. Unplug the appliance, or the shut off the appropriate circuit breaker.
  • Page 12 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information This page intentionally left blank.

  • Page 13: Modification History

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Modification History 04/2004 Miele USA Preliminary Information 06/2004 Miele USA Revised 08/2004 Miele USA Revised...
  • Page 14 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information This page intentionally left blank.

  • Page 15: Technical Data

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Technical Data Overview of Models Model Number Capacity Additional Information T1302 5 Kg Angled Controls, Vented T1303 5 Kg Flat Controls, Vented T1322C 5 Kg Angled Controls, Condenser Fully Integrated Style, T1329C 5 Kg...
  • Page 16 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information This page intentionally left blank.

  • Page 17: Layout Of Electrical Components

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Layout of Electrical Components Vented Models (B3/1) Residual Moisture Sensor (Drum Ribs, Slip Rings) (2R30) NTC Temperature Sensor (Heater Bank) (M5) Main Drive / Fan Motor (2K1/1) Heater Relay (1K1/1) Heater Relay (Z1)
  • Page 18 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information This page intentionally left blank.

  • Page 19: Condenser Models

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Layout of Electrical Components Condenser Models 1R30 Door Lock B3/1 Residual Moisture Sensor B8/7 Level Switch Capacitor 1F1 / 2F2 Temperature Limiter (Non Re-settable) H3/6 Drum Lighting K1/1 Heating Relay Fan And Drum Drive Motor Condensate Pump (Condenser Dryer Only)
  • Page 20 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information This page intentionally left blank.

  • Page 21: 010 Cabinet And Front Panel

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Cabinet and Front Panel...
  • Page 22 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information This page intentionally left blank.

  • Page 23: Technical Data

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Technical Data - To Be Updated Function Fault Repair Service Lid - Removal Figure 010-1: Cabinet Construction 1. Remove the screw caps from the side edges of the lid. 2.

  • Page 24: Plinth (Toekick) - Removal

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Toekick Removal 1. Remove the screw caps, Figure 010-1. 2. Remove the screws. 3. Slide the toekick to the left; pull from the appliance to remove. Front Panel - Removal 1.

  • Page 25: Support Bracket - Removal

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Support Bracket – Removal 1. Remove the Lid (010 4.1). 2. Remove the Fascia Panel (060 4.4) 3. Disconnect the connectors and pushbutton assembly from the electronic. 4. Remove the rear frame of the Fascia Panel. 5.
  • Page 26 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Rear Access Panel - Removal Figure 010-3: Rear Access Panel 1. Remove the 4 retaining screws. 2. Lift the panel from the appliance. Note Remove the Rear Access Panel for access to: The Heater Bank The Heater Bank (NTC) Temperature Sensor Both Temperature Limiters...

  • Page 27: 020 Door And Door Lock

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Door and Door Lock...
  • Page 28 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information This page intentionally left blank.

  • Page 29: Technical Data

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Technical Data Door Lock Mechanically operated; via cable and door button. Function Fault Repair Service Outer Door Panel – Removal 1. Open the door. 2. Refer to Figure 020-1. 3.

  • Page 30: Door Lock - Removal

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Door Lock – Removal Figure 020-2: Door Lock 1. Open the door. 2. Remove the Front Panel (010 4.3). Note Refer to Figure 020-2. The Door Lock, (1) uses a snap-in style retainer to attach to the drum support housing.
  • Page 31 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Drum, Rear Bearing, Sensor and Heater Bank...
  • Page 32 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information This page intentionally left blank.

  • Page 33: Technical Data

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Technical Data Heater Bank (NTC) Temperature Sensor – Resistance Values The heater bank temperature is monitored by the electronic via an NTC (Negative Thermal Coefficient). Temperature Sensor mounted at the top of the Heater Bank Assembly. As the temperature increases –...

  • Page 34: Function

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Heater Element – Activation Program Option Selected Heater Element R1 Heater Element R2 Normal Normal Turbo Normal Full Load Normal Gentle Table 030-2: Heater Element Activation Function Residual Moisture Sensor System The Electronic Residual Moisture Sensor system uses the amount of moisture in the laundry to determine how wet / dry the laundry is.

  • Page 35: Heating

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Heating 2.3.1 Heater Bank The Heater Bank uses two independently controlled elements (R1 and R2). AC power to elements is controlled by the Electronic via two independent Heater Relays. 2.3.2 Heater Bank Temperature Sensor The temperature of the Heater Bank is monitored by the Electronic...

  • Page 36: Service

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Service Drum - Removal 1. Remove the Front and Side Panel (010 4.3 and 4.4). 2. Remove the Support Bracket (010 4.5) 3. Remove the drum support housing (050 4.1) 4.

  • Page 37: Drum Rib Hardware

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Drum Rib - Removal 1. Remove the lid (010 4.1) 2. Refer to Figure 030-2, 3. Remove the screws (1). 4. Remove the slip ring screw (2). 5. Reassemble by following these instructions in reverse order. Figure 030-2: Drum Rib Hardware Slip Ring - Removal 1.

  • Page 38: Drum Bearing

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Drum Bearing - Removal 1. Remove the Rear Access Panel (010 4.6). 2. Refer to Figure 030-3. 3. Remove the 2 screws (2), 4. Slide the cover (1), to the left and remove it. 5.
  • Page 39 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Heater Bank - Removal 1. Remove the Lid (010 4.1) 2. Remove the Rear Access Panel (010 4.6). Figure 030-4: Heater bank, temperature limiters and temperature sensor 3. Note and disconnect the electrical connectors. 4.

  • Page 40: Wiring Harness Holder

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information 7. Refer to Figure 030-4. Remove the two 7mm screws (4). 8. Remove the heater bank. Figure 030-5: Wiring harness holder Reassembly Note To prevent damage to the wiring, ensure the harness is secured in its holder (Figure 030-5).
  • Page 41 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information NTC Temperature Sensor - Removal 1. Remove the Rear Access Panel (010 4.6). 1. NTC Temperature Sensor 2. Thermostats (Temperature Limiters) 3. Rubber Grommet 4. Retaining Screw (2) Figure 030-6: Removing the access cover on the rear outer wall of the appliance permits access to the Heater Bank, Thermostats (Temperature Limiters) and Temperature Sensor.

  • Page 42: Wiring Harness Holder

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Thermostats (temperature limiters) - Removal 1. Remove the Rear Access Panel (010 4.6). 2. Note and disconnect the electrical connections. 3. Remove the screws. 4. Lift the Thermostat(s) from the Heater Bank Assembly. Residual Moisture Sensor –...

  • Page 43: Residual Moisture Sensor Brush Replacement

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Residual Moisture Sensor Carbon Brush - Replacement Figure 030-8: Residual Moisture Sensor Brush Replacement 1. Remove the Lid (010 4.1). 2. Refer to Figure 030-8. 3. Lift the Brush Assembly arm and release the two brushes from the arm.

  • Page 44: Rear Drum Seal

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information 4.10 Rear Seal - Removal Figure 030-9: Rear Drum Seal 1. Remove the Drum (030 4.1) 2. Refer to Figure 030-9. 3. Remove the screw (2). 4. Turn the seal and fixing ring (1), counterclockwise to remove it from the holder.

  • Page 45: Drive And Fan Motor

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Drive and Fan Motor...
  • Page 46 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information This page intentionally left blank.

  • Page 47: Technical Data

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Technical Data Main Motor 120VAC Function Main Motor The Main Motor provides power to the Drum using an intermediate gear / drive belt assembly. The fan impeller(s) (two on condenser dryers – refer to Figure 040- 1) are mounted on the motor shaft and move the airflow through the appliance.

  • Page 48: Fault Repair

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Fault Repair Service Drum Drive Belt - Removal Figure 040-2: Drives 1. Remove the right Side Panel (010 4.4) 2. Refer to Figure 040-2. 3. Unclip the spring (2). 4.

  • Page 49: Fan Impeller

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information V-Belt - Removal 1. Remove the right Side Panel (010 4.4) 2. Refer to Figure 040-1. 3. Unclip the tensioning spring (2). 4. Loosen the bolts (1 and 4), and remove the V-belt. Intermediate Drive - Removal 1.
  • Page 50 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information This page intentionally left blank.

  • Page 51: Air Circulation And Front Bearing

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Air Circulation and Front Bearing...
  • Page 52 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information This page intentionally left blank.
  • Page 53 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Technical Data 1R30 (NTC) Temperature Sensor (Fan Housing) - Resistance Values Temperature (°C) Temperature (°F) Resistance (kΩ) 18.6 14.9 12.0 9.73 7.96 6.55 5.42 4.52 3.78 3.19 2.70 2.29 1.96 1.68...

  • Page 54: Function

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Function Drum Support Housing The Drum Support Housing: Guides the drying air from the drum to the air guide Contains the Front Drum Bearing and Front Seal Secures the Drum Light Assembly Contains a removable access panel to the Fan Impeller (vented models only) Provides a port for 2...
  • Page 55 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information 1. Drum Light Holder 2. Mounting Screw (four) 3. Porthole Seal 4. Front Drum Bearing Mount 5. Fan Impeller Access Cover Drum Support Housing Figure 050-1: (Vented Models)

  • Page 56: Fault Repair

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Figure 050-2: Drum Support Housing (Condenser Models) Fault Repair Drying temperature too high Cause Excessive lint build-up Remedy Clean the filter(s), drum support housing temperature sensor and ducting as necessary.

  • Page 57: Service

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Service Drum Support Housing – Removal Caution To prevent damage to the Rear Drum Bearing, ensure the drum is empty and no excess weight is placed on the drum while the drum support housing is uninstalled from the appliance.

  • Page 58: Fill Ring

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Front Drum Bearing – Adjustment (does not apply to all models) Figure 050-3: Drum bearing 1. Remove the front panel (010 4.3) 2. Refer to Figure 050-3. 3. Remove the Screws (4) 4.

  • Page 59: Opening The Light Bulb Cover

    6. Flip up the light bulb cover and press it firmly until it clicks into place. Figure 050-4: Opening the light bulb cover. Safety Note Replace the light bulb with a temperature proof bulb, available from Miele’s Parts Department. The light bulb must not exceed the maximum wattage listed on the data plate.
  • Page 60 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information This page intentionally left blank.

  • Page 61: Condenser System

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Condenser System (Condenser Models Only)
  • Page 62 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information This page intentionally left blank.

  • Page 63: Function

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Technical Data To be updated Function Condenser Box - Overview Figure 055-1: Condenser Box Assembly...

  • Page 64: Float Switch And Drain Pump

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Float Switch & Condenser Pump Figure 055-2: Condenser Pump and Float Switch Figure 055-2: Float Switch and Drain Pump...

  • Page 65: Condenser Drawer

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Condenser Drawer Figure 055-3: Condenser Drawer...

  • Page 66: Fault Repair

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Fault Repair Long Drying Time Cause The Condenser Box is clogged blocking the air flow. Remedy Clean the Condenser Box (055 4.1). Water Leaking from appliance Cause Fault in Condenser Water Path Remedy Check Condenser Water Path hoses and connections.

  • Page 67: Condenser Box Access Panel

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Figure 055-4: Condenser Box Access Panel Figure 055-5: Condenser Door Lock Figure 055-6: Unlocking the Condenser Box Lock 5. Refer to Figure 055-7: Pull out the condenser. 6. Refer to Figure 055-8. Rinse the condenser along the left side with warm water.

  • Page 68: Removing The Condenser Box

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Figure 055-7: Removing the Condenser Box Figure 055-8: Rinsing the left side of the Condenser Box. 7. Refer to Figure 055-9. Rinse the condenser from the front with warm water.
  • Page 69 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Fascia Panel and Electrical Components...

  • Page 70: Technical Data

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Technical Data Function Heater Relays Two Heater Relays are controlled by the Electronic. These relays provide the 120VAC supplied to the heater elements. 1K1/1 provides the switching for Heater Element R2 2K1/1 provides the switching for Heater Element R1.

  • Page 71: Fault Repair

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Fault Repair Fault Summary Turn on the appliance Select a program. Press Start. Allow the appliance to operate for at least two minutes. Observe the display for the following: Fault Signal Cause Buzzer...

  • Page 72: Service

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Service Programming Mode Summary Initial requirements - Turn off the machine. - Close the door. Note Once you begin the access procedure, it must be completed within 10 seconds. Accessing 1.
  • Page 73 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Program Setting Programmable Option(s) Flashing Flashing Drying Buzzer LED Program Function Programmable Settings Long Short Short Reset all At least one standard programmable – setting has been modified functions to standard –...

  • Page 74: Demonstration Mode (Dealer Displays)

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Demonstration Mode (Dealer Displays) Initial requirements - Turn off the unit. - Close the door. Note Once you begin the access procedure, it must be completed within 10 seconds. Accessing 1.

  • Page 75: Service Mode

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Service Mode Initial requirements - Turn off the unit. - Close the door. Note Once you begin the access procedure, it must be completed within 10 seconds. Accessing 1.
  • Page 76 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Test Step Service Level 2 – Activation and Navigation The Test Step is indicated by a flashing Drying LED. While in Service Level 2 press the Start Button to begin the first Function Test.
  • Page 77 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information TEST STEP SERVICE LEVEL Flashing SERVICE Rhythm Function Tested/ FUNCTION Flashing Drying LED Machine Response Buzzer LED Long Short Drive/Fan motor. Drum turns as follows: counterclockwise for 10 seconds, a –...
  • Page 78 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information SERVICE TEST STEP LEVEL SERVICE Flashing Rhythm Of Function Tested/Machine FUNCTION Flashing Drying LED Response Rhythm Of Buzzer LED Long Short Residual moisture sensing circuit, high resistance check. Ensure the clip leads or the wires used in the low resistance check are removed;...
  • Page 79 T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information SERVICE TEST STEP LEVEL Flashing Rhythm SERVICE Of Drying LED Flashing FUNCTION Function Tested/Machine Response Rhythm Of Buzzer Long Short Float Switch Test (condenser – models). Buzzer operates when the float switch is activated.

  • Page 80: Fascia Panel Removal

    T1403 and T1405 Clothes Dryers Technical Information Fascia Panel - Removal Figure 060-1: Fascia Panel - Removal 1. Use a Miele Opener (or a small screwdriver) and press the front section downwards. 2. Tilt the panel from the top outward. Note To ensure the springs do not get lost remove them from the lower groove for the panel.

  • Page 81: Electronic Retaining Screw

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Electronic / Controls - Service Position Note The electronic can be positioned into the retaining slots on the sides of opening during service procedures. 1. Remove the Fascia Panel (060 4.4) 2.

  • Page 82: Button Assembly

    T1302, T1303, T1322, T1329ci, T1323c, T1403 and T1405 Clothes Dryers Technical Information Figure 060-3: Button Assembly 7. Refer to Figure 060-4. 8. Slide the control module into the retaining slots on either side of the fascia panel opening. Figure 060-4: Electronic / Controls in service position...
  • Page 86 This page intentionally left blank...

This manual is also suitable for:

Touchtronic t1303Touchtronic t1329ciTouchtronic t1403Touchtronic t1405Touchtronic t1322

Table of Contents