Download Print this page

Miele Touchtronic T 1329 C Operating Instructions Manual

Miele clothes dryer user manual.
Hide thumbs

Advertisement

Operating Instructions
Condenser Dryer
T 1329 C
UV
To prevent accidents
and machine damage
read these instructions
installation or use.
M.-Nr. 06 057 180

Advertisement

   Related Manuals for Miele Touchtronic T 1329 C

   Summary of Contents for Miele Touchtronic T 1329 C

  • Page 1

    Operating Instructions Condenser Dryer T 1329 C To prevent accidents and machine damage read these instructions installation or use. M.-Nr. 06 057 180...

  • Page 2

    ........... . . 5 .

  • Page 3

    WARNING - To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow basic precautions, including the following: Read all instructions before using the appliance. Do not dry articles that have been previously cleaned, washed, soaked or spotted with gasoline, dry-cleaning solvents or other flammable or explosive substances.

  • Page 4

    GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current. This appliance is equipped with a cord having an equipment grounding conductor and a grounding plug.

  • Page 5

    a e- For selecting a drying program. For selecting a drying option. For selecting the dryness level of finished laundry. Shows the current cycle of the drying program. When selected, a buzzer will sound at the end of a program. An illuminated indicator will alert you if the child lock has been activated or if a fault occurred.

  • Page 6

    The dryer must be correctly installed and connected before the first use. Please refer to the "Installation Instructions". ^ Before using for the first time clean the drum with a cloth. Before drying, check fabric care labels for special drying instructions. q Dry with normal temperature r Dry with low temperature (select "Gentle"...

  • Page 7

    ^ Press the "On/Off" button to turn on the dryer. ^ Press the "Door" button to open the door. ^ Load the laundry loosely into the drum. ^ Make sure the lint filters are in place. ^ Close the door with a firm swing - do not push it shut.

  • Page 8

    Multi-layer fabrics, mixed loads of sturdy cottons, e.g. jeans, towels. Uniform loads of cotton, e.g. sheets, underwear, socks. Knitted cotton fabrics that may shrink, e.g. jersey material or lightweight cottons. Cotton or linen fabrics to be left damp for ironing. Cotton or linen fabrics which will be ironed with a rotary iron.

  • Page 9

    ^ A drying option can be selected or deselected with each press of the button. Fast drying for sturdy fabrics with increased temperature and a reduced program length. For drying delicate fabrics slowly at a lower temperature. Prevents wrinkles if laundry is not removed immediately after the end of a program.

  • Page 10

    The dryness level can be selected in the "Normal" and "Wrinkle-free" programs. (The dryness level of the other programs cannot be adjusted.) ^ Press the selection button until the desired indicator illuminates. In the "Wrinkle-free" program, only "More Dry", "Normal" and "Less Dry" can be selected.

  • Page 11

    ^ Press the "Start/Stop" button. Once the program starts, the current cycle of the program will be indicated in the "STATUS" display. The "Anti-crease/End" indicator will light at the end of a program and the buzzer will sound if it was selected. If a fault occurred, a "FAULT"...

  • Page 12

    ^ Press and release the "Start/Stop T" button to stop the drying program. To continue drying: ^ Select the new program by pressing the e or - button. ^ Select any desired options. ^ Select a dryness level (available in the "Normal"...

  • Page 13

    When activated, the child lock prevents the dryer from being operated by locking the control panel functions. The dryer can be turned on but not started. The "Child lock" indicator will flash. The door can be opened. Make sure the dryer is turned off and the door is closed.

  • Page 14

    The lint filter must be cleaned after every program. ^ Open the door and remove the lint filter by gently lifting it upwards. ^ Wipe the lint off the filter with your hand (do not use any sharp objects!) ^ Remove the lint from the door frame lint filter with your fingers.

  • Page 15

    To reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance. Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the dryer.

  • Page 16

    Depending on the installation, the condensed water will either be pumped to a drain or collected in the condensed water container, located in the upper left corner of the machine. The container holds approximately 1 gallon of water. The container should be emptied weekly.

  • Page 17

    To reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance. Detergent residues, hair and lint in the drying air can penetrate filters and clog the condenser.

  • Page 18

    ^ Turn the condenser lock up. ^ Pull out the condenser. ^ Hold the condenser against the light. ^ Look through the front and left side (as illustrated above) of the condenser to check for lint. If no lint is visible: ^ Return the condenser.

  • Page 19

    ^ Rinse the condenser along all sides with warm water as shown in pictures below. ^ Check the condenser for visible soiling. Continue rinsing until the condenser until clean. ^ Check the condenser gasket for soiling. Do not remove or kink the gasket! ^ Place the condenser lengthwise on a towel to air dry.

  • Page 20

    (see illustration). ^ Flip down the bulb cover. ^ Replace the light bulb with a temperature proof bulb, available from Miele. The light bulb must not exceed the maximum wattage listed on the data plate. ^ Flip up the light bulb cover and press it firmly until it clicks into place.

  • Page 21: Quick Guide

    Quick Guide Remove this guide for easy reference Please read all instructions, especially the "Important Safety Instructions", using the dryer.

  • Page 22

    ^ Press the "On/Off" button to turn on the dryer. ^ Press the "Door" button to open the door. ^ Load the laundry into the drum. Make sure that there is enough space in the drum for clothes to tumble freely. To prevent fabric damage, check that laundry will not be caught in the closed door.

  • Page 23

    ^ Press the "Start/Stop" button. The "Anti-crease / End" indicator will light. ^ Press "Door" and remove the laundry. ^ Clean the lint filter. ^ Press the selection button until the desired indicator illuminates. ^ Press the "On/Off" button to turn off the dryer.

  • Page 24

    Available drying options Turbo, Gentle, Anti-crease For laundry to be folded and shelved immediately, e.g. jeans, towels. For uniform loads, e.g. sheets, underwear, socks. For knitted items that may shrink, e.g. jersey material or lightweight cottons. For items to be left damp for ironing. For items to be ironed with a rotary iron.

  • Page 25

    The "Start/Stop" button was not pressed. The circuit breaker tripped or the dryer is unplugged. The door is not closed. Add fabric softener to laundry when washing or select the "Less Dry" setting on the dryer. The bulb may be bad or burned out. The child lock is activated.

  • Page 26

    The lint filter is clogged. The air supply in the room is insufficient. The airflow is insufficient in the area of the dryer. The lint filters are clogged. The laundry was not spun sufficiently in the washer. The dryer is overloaded. Metal zippers interfere with the dryer’s moisture sensors.

  • Page 27

    In the event of a fault you cannot fix yourself, please contact the Miele Technical Service Department 1-800-999-1360 techserv@mieleusa.com 1-800-565-6435 service@miele.ca When contacting Technical Service, please quote the model and serial number of your appliance. They can be found on the data plate located below the drum opening.

  • Page 29

    INSTALLATION INSTRUCTIONS...

  • Page 30

    Installation, repair and maintenance work should be performed by a Miele authorized service technician. Work by unqualified persons could be dangerous and could void the warranty. Be sure to observe local building codes. Before installation, disconnect the tumble dryer from the electrical...

  • Page 31

    The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. To prevent suffocation of children, ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children. Old appliances may contain materials that can be recycled.

  • Page 32

    The tumble dryer can also be placed on top of a Miele washing machine for a stacked installation. An appropriate stacking kit is required. The stacking kit is available from your Miele dealer or the Miele Technical Service Department. Installation of the stacking kit must be performed by a Miele authorized technician.

  • Page 33

    057B for on-site outlet NEMA 10-30 R 060B for on-site outlet NEMA 14-30 R For more information on the "Easy Installation Kit" or if you have questions concerning the electrical connection, please contact: 1-800-999-1360 techserv@mieleusa.com 1-800-565-6435 service@miele.ca...

  • Page 34

    a Power cord with plug b Condensed water container c Control panel d Door (with decor option) e Access panel to condenser f Four height adjustable feet g Optional drain hose: An alternative to using the condensed water container is to drain condensed water into a sink, standpipe or gully.

  • Page 35

    When the machine lid needs to be removed to reduce the height of the machine, a * is necessary. It must be installed by a Miele Service Technician. The cover plate of the built under kit replaces the appliance lid and ensures electrical safety.

  • Page 36

    An airflow gap of " (10 mm) must be provided between the machine and the floor. This airflow gap must not be blocked by a toekick or thick piled carpets. Do not install the dryer next to a refrigerator. The warm air exhausting from the dryer will affect the thermostat of the refrigerator, causing it to run continuously.

  • Page 37

    The door can be fitted with a customized door panel (optional accessory) to match the adjacent cabinets. Decor panel measures Width ... . . 23 Height ... . 24 Thickness .

  • Page 38

    The door panel can be shortened to match the height of the adjacent cabinetry. The measure equals the space from the bottom of the washer door to the bottom of the adjacent cabinet. Cut the bottom of the door panel with a jigsaw according to .

  • Page 39

    When drying is in progress, condensed water is pumped into the condensed water container through the drain hose at the back of the dryer. The condensed water can be drained directly into a drain if the machine is installed near a sink or standpipe so that the condensed water container does not have to be emptied.

  • Page 40

    ^ Insert the drain hose into the holder and secure it at the rear dryer top (see holder). ^ Use the clamps at the dryer rear to secure the drain hose.

  • Page 44

    All rights reserved / 4804 M.-Nr. 06 057 180 / 04...

Comments to this Manuals

Symbols: 0
Latest comments: