Additional Fan; Pressure Sensor; Payment System; Settings For The Payment System - Miele PDR 507 EL Operating And Installation Instructions

Additional fan

External hardware is connected via the
Miele XCI box.
If an extra fan is connected, it must be
switched on at the same time as the
drive unit.
– Off
– On

Pressure sensor

External hardware is connected via the
Miele XCI box.
When using a shared exhaust air duct,
one tumble dryer may have to be
switched off or suppressed from the
outset if certain pressure levels have
built up in the ducting. Because the
pressure sensor is an external unit,
there is the option to add both a
normally open contact or a normally
closed contact.
A message appears in the display while
the exhaust air flap is open.
– Off = Not active
– Normally open contact
Responds to high potential
– Normally closed contact
Responds to low potential
= Active
= Active
Supervisor level

Payment system

External hardware is connected via the
Miele XCI box.

Settings for the payment system

If you wish to change the settings later,
please contact Miele.
You would like to connect a payment
system.
– No payment system
The next settings are skipped and
initial commissioning can be
completed.
– Programme operation
The machine is operated using a coin
box. The user purchases a wash
programme.
– Time operation
The tumble dryer is coin-operated
using a time meter. The user
purchases a time-controlled
programme.
– Timed operation with pulse counter
For payment systems where the
usage time is increased each time a
coin is inserted.
77