T1302, T1303, T1322, T1329ci, T1323c,
T1403 and T1405 Clothes Dryers
4.5
Heater Bank - Removal
1. Remove the Lid (010 4.1)
2. Remove the Rear Access Panel (010 4.6).
Figure 030-4: Heater bank, temperature limiters and temperature sensor
3. Note and disconnect the electrical connectors.
4. Refer to Figure 030-5.
5. Release the wiring harness from its holder (1).
6. Remove the rubber grommet (3), with the wiring harness.
31
Technical Information