Technical Information
4.6
Rear Access Panel - Removal
Figure 010-3: Rear Access Panel
1. Remove the 4 retaining screws.
2. Lift the panel from the appliance.
Note
Remove the Rear Access Panel for access to:
The Heater Bank
The Heater Bank (NTC) Temperature Sensor
Both Temperature Limiters
The Rear Drum Bearing
Refer to section 030 / Heater Bank for further information.
T1302, T1303, T1322, T1329ci, T1323c,
T1403 and T1405 Clothes Dryers
18