Removing The Packing Materials - Roland VersaCamm SP-540i Setup Manual

3. Assembling and Installing

Removing the Packing Materials

Tape and packing materials are attached to the machine to protect it from vibration during transportation. When installation
is complete, remove these.
Remove all packing materials. Any that remain may cause faulty operation or breakdown when the

power is switched on.
Store the packing materials carefully, because they are needed again when transporting the machine

for relocation or the like.
Remove the packing.
You can attach the removed packing material at the location shown in the figure for storage.
26
Tape
Packing
Remove the packing.
Packing
Remove the retainer and remove the packing.
Tape
Packing
Remove the packing.
Retainer
Packing