Roland VersaCamm SP-540i Setup Manual page 32

5. Installing the Ink Cartridges
2.
Clean the heads using the SOL INK cleaning cartridges.



SET SOL CL-LIQUID
1 2

SET DUMMY CRT.
SLOT: 3, 4
FILLING INK...
＞＞＞

REMOVE SOL CL
1 2
FILLING INK...
＞＞＞
The flashing numerals indicate the slot
numbers. Follow the on-screen instruc-
tions and carry out operations in numeri-
cal sequence.
These instructions mean to remove the
SOL INK cleaning cartridges from slots
1 and 2.
30
Make sure the ink type matches the ink cartridges.
Press
Make sure the drain bottle is installed.
Press
Insert the SOL INK cleaning cartridge into slots 1 and 2.
Insert firmly until you hear a beep.
Insert the dummy cartridges into slots 3 and 4.
Press
Dummy cartridge
Orient with the round
hole facing up
Pull out the SOL INK cleaning cartridges from slots 1 and 2.
.
.
.
When you remove a cartridge cor-
rectly, the number stops flashing and
stays lighted.
Slowly insert all the way.