Roland VersaCamm SP-540i Setup Manual page 25


Install the two shafts to the arms.
Install the stopper-attached shaft at the location closest to the back of the machine (the location farthest from the
front of the machine).
Arm

Engage the brake.
Using the machine with the brake disengaged may result in unstable media feed.
Pass one end of the shaft through an arm,
then move the other end of the shaft so
that the machine and the shaft are parallel.
Shaft
Fit the ends of the shaft into the notches
in the arms.
Install the other shaft in the same way.
3. Assembling and Installing
Brake
23