3.11.3 NO HDD
In NO HDD, we define:
Diagram 3.22
BUZZER: NO HDD buzzer.
ENABLE: To enable a buzzer when no HDD has been found.
DISABLE: To disable NO HDD buzzer.
ALARM OUTPUT: This will transmit a signal to another device. The setting of
alarms are NONE = not activated, 1 = output signal 1 transmitted, 2 = output
signal 2 transmitted, 3 = output signal 3 transmitted and 4 = output signal 4
transmitted. To change this, simply use the Jog Dial on the DVR to make your
selection.
ALARM DURATION: Buzzer noise and event record duration of an alarm,
from 1 sec to 99 seconds. The default value is 5 seconds.
NETWORK ALARM:
YES: To enable network alarm.
NO: To disable network alarm.
59