Table of Contents
Advertisement
Dial Jog to change items in the SUMMERY table.
All cameras' statuses are shown in the SUMMARY table. The table is for checking camera
overall statuses only, not for setting.
Note: The SUMMARY table also exists in ALARM, MOTION and VLOSS SETUP
MENU. All of these SUMMARY tables are also for checking particular overall statuses,
not for setting.
3
.
3
R
e
c
o
r
d
S
e
t
3
.
3
R
e
c
o
r
d
S
e
t
Diagram 3.6 is a screen shot of the RECORD SETUP MENU. This menu is for setting up the
options for recording. We define recording as something on which sound or visual images have
been recorded. In the RECORD SETUP MENU the following fields are defined as follows:
Copy camera's setting from a camera to other cameras: In order to copy the
setting from a camera to other cameras, we provide a setting copy function. Press
MENU when you finish setting up a camera, and then press COPY. A COPIED
sign will show up on the top right corner of the screen, and it means the setting has
been copied. Dial the Jog to the camera you would like to copy, and then press
SEARCH to paste. The previous setting of the camera will be covered, and a
PASTED sign will show up.
NOTE: TITLE, PTZ ID, INSTALL/COVERT cannot be copied. These 3
options need to be set independently.
u
p
M
e
n
u
u
p
M
e
n
u
Diagram 3.6
25
Advertisement
Table of Contents
