3.7.2
ALARM NETWORK (Reserved)
DVR can send out Alarm message to an Alarm Server (PowerCon4). This function is reserved to
work with our Control Management System – PowerCon. In the ALARM of the NETWORK
SETUP MENU, we define:
Note: Since every Network Configuration is different, please contact your Network
Administrator or ISP for how to assign those IP addresses and port numbers.
PROTOCOL: Select which communication protocol with Alarm servers or
Alarm receiving clients.
TCP: communicate with client via TCP protocol.
UDP: communicate with client via UDP protocol
PORT NUMBER: setting the communication port with Alarm server.
UNIQUE ID: setting the ID number of your DVR to Alarm server.
SERVER 1: assign the IP address of Alarm server 1.
SERVER 2: assign the IP address of Alarm server 2.
SERVER 3: assign the IP address of Alarm server 3.
Diagram 3.11
40