Wrong monitor has been set under Windows 2000
►
Restart the device.
►
If the message Starting Windows appears, press function key F8
The Windows 2000 Advanced Options Menu appears.
►
Select Safe Mode or Safe Mode with Network.
►
Set the correct values for the attached monitor as described in the operating manual of the
monitor by selecting Start - Settings - Control Panel - Display - Settings.
Wrong monitor has been set under Window XP
►
Restart the device.
►
Press F8 while the system is booting.
Either the Windows Advanced Start Options menu or the menu for selecting the operating system
appears.
►
If the menu for selecting the operating system appears, press F8 .
►
Select Safe Mode or Safe Mode with Network.
►
Set the correct values for the attached monitor as described in the operating manual of the
monitor by selecting Start - Settings - Control Panel - Display and then the Appearance, Themes,
Settings tabs.
Wrong setting for the monitor under Windows Vista
►
Restart the device.
►
Press F8 while the system is booting.
►
Either the Windows Advanced Start Options menu or the menu for selecting the operating system
appears.
►
If the menu for selecting the operating system appears, press F8 .
►
Select Safe Mode or Safe Mode with Network.
►
Set the correct values for the connected monitor, as described in the operating manual of the
monitor, by selecting Start (Settings) - Control Panel - Display - Settings
The wrong RAM modules have been inserted
See the manual for the mainboard for information on which memory modules can be used.
A26361-K690-Z220-1-7619, edition 1
Troubleshooting and tips
31