Removing The Graphics Card - Fujitsu ESPRIMO E Operating Manual

System expansions

Removing the graphics card

► Open the casing (see "Opening the casing").
For devices with low-profile slots
► Open the locking lever (see "Installing board in low-profile slot").
► Press against the ledge of the slot (2) to release the graphics card from the slot.
► Pull the graphics card out of the slot in the direction of the arrow (3).
► Push the slot cover into the slot in the direction of the arrow (1). Make sure that the tip of the
slot cover engages in the notch in the casing bottom.
► Close the locking lever (see "Installing board in low-profile slot").
► Close the casing (see "Closing the casing").
For devices with board bracket for long boards
► Press on the retaining bracket in the direction of the arrow and fold it down.
► Press against the ledge of the slot (2) to release the graphics card from the slot.
► Pull the graphics card out of the slot in the direction of the arrow (3).
► Push the slot cover into the slot in the direction of the arrow (4). Make sure that the tip of the
slot cover engages in the notch in the casing bottom.
► Fold the retaining bracket down again in the direction of the arrow (5). Ensure that the retaining
bracket engages.
► Close the casing (see "Closing the casing").
52 A26361-K690-Z220-1-7619, edition 1