Installing And Removing The Graphics Card; Installing The Graphics Card - Fujitsu ESPRIMO E Operating Manual

Installing and removing the graphics card

The outermost slot in your device is specially designed for graphics cards (e.g. PCI Express Low
Profile).

Installing the graphics card

► Open the casing (see "Opening the casing").
For devices with low-profile slots
► Open the locking lever (see "Installing board in low-profile slot").
► Pull the slot cover out of the slot in the direction of the arrow (2).
► Push the board up to its slot (3) in the direction of the arrow as far as the stop.
► Close the locking lever (see "Installing board in low-profile slot").
► Close the casing (see "Closing the casing").
For devices with board bracket for long boards
► Press on the retaining bracket in the direction of the arrow and fold it down.
► Pull the slot cover out of the slot in the direction of the arrow (2).
► Push the board up to its slot (3) in the direction of the arrow as far as the stop.
► Fold the retaining bracket down again in the direction of the arrow (4). Ensure that the retaining
bracket engages.
► Close the casing (see "Closing the casing").
A26361-K690-Z220-1-7619, edition 1
System expansions
51