Fujitsu ESPRIMO E Operating Manual page 53

If you have installed or removed a PCI board, check the relevant PCI slot settings in the
i
BIOS Setup. If necessary, change the settings. Further information is provided in the PCI
board documentation.
The upper slot is suitable for low-profile cards with an adapter.
A26361-K690-Z220-1-7619, edition 1
► Push the board up to its slot in the
direction of the arrow as far as the stop.
► Press the board into the slot so that it
engages.
► Fold up the retaining bracket so that it
engages.
► If necessary, connect the cables.
► Reinstall the board bracket in reverse
order as described above.
► Replace the cross piece (see "Installing
the cross-piece").
► Close the casing (see "Closing the
casing").
System expansions
45