Grundig GWN 47230 User Manual page 84

Maintenance and cleaning
ƒc When draining of water is finished, close
the end by the plug again and fix the hose
in its place.
Turn the pump filter to take it out.
ƒd
If the product does not have an
emergency draining hose, to discharge
the water:
ƒa Place a large container in front of the filter
to catch water from the filter.
Loosen pump filter (anticlockwise) until
ƒb
water starts to flow. Fill the flowing water
into the container you have placed in front
of the filter. Always keep a piece of cloth
handy to absorb any spilled water.
When the water inside the machine is
ƒc
finished, take out the filter completely by
turning it.
ƒ4 Clean any residues inside the filter as well
as fibers, if any, around the pump impeller
region.
84 / 92 EN
ƒ5 Install the filter.
ƒ6 If the filter cap is composed of two pieces,
close the filter cap by pressing on the tab.
If it is one piece, seat the tabs in the lower
part into their places first, and then press
the upper part to close.
Washing Machine / User's Manual