Auxiliary Function Selection; Quick Wash; Time Display - Grundig GWN 47230 User Manual

Operating the product

5.11 Auxiliary function selection

Select the desired auxiliary functions before
starting the programme. Whenever a
programme is selected, frames of the auxiliary
function symbols that can be selected together
with it illuminate. When an auxiliary function is
selected, the inner section will illuminate, as.
C
Frame of the auxiliary function symbol
that cannot be selected with the current
programme will not illuminate.
Also the frames of the auxiliary function
suitable for the current programme after the
washing has started remain illuminated. You
can select or cancel the auxiliary functions
whose frames are illuminated. If the wash
cycle has reached a point where you cannot
select the auxiliary function, the function's
frame goes off.
C
Some functions cannot be selected
together. If a second auxiliary function
conflicting with the first one is selected
before starting the machine, the function
selected first will be canceled and the
second auxiliary function selection will
remain active. For example, if you want
to select Quick Wash after you have
selected the Extra Rinse, Extra Rinse will
be canceled and Quick Wash will remain
active.
C
An auxiliary function that is not
compatible with the programme cannot
be selected. (See "Programme and
consumption table")
C
Some programmes have auxiliary
functions that must be operated
simultaneously. Those functions cannot
be cancelled. The frame of the auxiliary
function will not be illuminated, only inner
area will be illuminated.
Washing Machine / User's Manual
• Prewash
A Prewash is only worthwhile for heavily
soiled laundry. Not using the Prewash will
save energy, water, detergent and time.

• Quick Wash

This function can be used in Cottons and
Synthetics programmes. It decreases the
washing times and also the number of rinsing
steps for lightly soiled laundry.
C
When you select this function, load
your machine with half of the maximum
laundry specified in the programme
table.
• Rinse Plus
This function enables the machine to make
another rinsing in addition to the one already
made after the main wash. Thus, the risk for
sensitive skins (babies, allergic skins, etc.) to
be effected by the minimal detergent remnants
on the laundry can be reduced.
• Anti-Creasing
This function creases the clothes lesser when
they are being washed. Drum movement is
reduced and spin speed is limited to prevent
creasing. In addition, washing is done with a
higher water level.
• Night mode
Use this programme to wash the cottons with
lesser energy consumption and silently. Spin
steps are cancelled for a silent washing and
the cycle ends with the Rinse Hold step. After
completion of the programme, run Spin cycle
to spin the laundry.

Time display

Remaining time for the completion of the
programme while it is running is displayed as
"01:30" in hours and minutes format.
C
Programme time may differ from
the values in the "Programme and
consumption table" depending on the
water pressure, water hardness and
temperature, ambient temperature,
amount and the type of laundry,
auxiliary functions selected and the
changes at the mains voltage.
75 / 92 EN