Table of Contents
Advertisement
WALL MOUNTING INSTRUCTIONS
The GefenToolBox 4x2 Matrix for HDMI should be mounted vertically in a wall or
cabinet with wood/drywall screws as shown in the diagram above. There should
be an inch or two of clearance between the edges of the unit and any walls or
vertical surfaces to allow for enough clearance for insertion and retraction of
cables at the HDMI connectors.
For installation on a drywall surface, use a #6 drywall screw. It is recommended
when installing on a drywall surface that studs be used to secure the Matrix
should undue stress be applied when connecting and disconnecting HDMI
cables.
23
Advertisement
Table of Contents
