Table of Contents
Advertisement
Installation
Menu/Back
Video Source
►
Select
1.
Use DVI cables to connect a DVI source (e.g. computer) to each one of the DVI-D In
ports (Source 1 - Source 4) on the rear panel. Note that only DVI-D (digital) sources
are supported.
►
Audio Source
Connect 3.5mm mini-stereo cables from the audio output on the computer to the L/R
2.
In jacks on the rear panel.
►
USB (Host)
3.
Connect USB cables from each computer to the USB Host ports on the read panel.
Mic L/R Out
Mic
Video B
Audio
Video B DVI-D
USB
1
2
►
Displays
4.
Connect a DVI display to each of the Workstation ports (Video A DVD-D and Video B
DVI-D). Note that the display connected to Video A will support multiple sources.
The display connected to Video B will only be used to display the currently selected
source and cannot display multiple sources.
►
Mouse & Keyboard (Switcher Control)
5.
Connect a computer keyboard to the Keyboard USB port. Connect a mouse device
to the Mouse USB port. To take advantage of all the control features, we recommend
a mouse that has a scroll wheel.
12V DC
RS-232 In
Full
Connection Instructions
L/R In USB Host
Mic
L/R In USB Host
DVI-D In
Source 1
Source 2
3
4
RS-232 Out
PIP
Quad
4x1 DVI KVM Multiview Switcher
Mic
L/R In USB Host
Solo
USB
Audio
DVI-D In
DVI-D In
Source 3
Keyboard
USB
Video A DVI-D
page | 7
PAP
Reset
Mic
L/R In USB Host
DVI-D In
Source 4
Mouse
Mic L/R Out
USB
Video B DVI-D
Workstation
Power
Menu/Back
Select
Mic
L/R In USB Host
DVI-D In
Source 1
F
Advertisement
Table of Contents
