Connecting And Operating The 4X2 Matrix For Hdmi - Gefen GTB-MHDMI1.3-442 User Manual

1. Use the included HDMI cables to connect up to four (4) source devices to
the HDMI In ports on the 4x2 Matrix for HDMI.
2. Connect up to two HDTV displays with the supplied HDMI cables.
3. Connect the included 5V DC locking power supply to the power receptacle
on the Matrix. Do not overtighten the locking connector.
4. Connect the other end of the power supply to an available power outlet.
NOTE: If the source and display support 3D then the 4x2 Matrix for HDMI
will pass through the 3D signal. To pass the 3D signal, a 3DTV must be
connected to HDMI Out 1 on the Matrix.
Wiring Diagram for the GefenToolBox 4x2 Matrix for HDMI
Gefen
CONNECTING AND OPERATING
THE 4X2 MATRIX FOR HDMI
How to Connect the 4x2 Matrix for HDMI
HDMI Switcher HDMI Switcher
HDMI Display
GTB-MHDMI1.3-442
6
HDMI CABLE
HDMI Display