Table of Contents
Advertisement
RS-232 SERIAL CONTROL COMMANDS
The following Commands are not case-sensitive
Command
1,2,3,4,5,6,7,8
H
S
X
Y
1, 2, 3, 4, 5, 6, 7, 8
Selects the Input to be routed to Output 1 or Output 2. Numbers 1 - 4 route to
Output 1. Numbers 5 - 8 route to Output 2.
Syntax:
1, 2, 3, 4, 5, 6, 7, or 8
Parameters:
None
Examples:
2
6
H
Resets the 4x2 Matrix to factory (default) settings. The IR channel for the Matrix
is set to 0. The command is not case-sensitive.
Syntax:
H
Parameters:
None
Commands
Description
Input selection for Output 1 or Output 2
Reset to factory (default) settings
Returns the current status of the Matrix
Power OFF the Matrix
Power ON the Matrix
routes Input 2 to Output 1
routes Input 2 to Output 2
20
Advertisement
Table of Contents
