Table of Contents
Advertisement
RS-232 SERIAL CONTROL COMMANDS
S
Returns the current status of the Matrix.
Syntax:
S
Parameters:
None
Remarks:
When using the S command, the following information is returned:
Power state: X (OFF) or Y (ON)
Input: 1 - 4
Output: 5 - 8
Examples:
The unit is ON and Input 3 is routed to Output 1:
S
Y35
The Y indicates that the unit is powered ON. The 3 indicates Input 3 and the 5
indicates that the signal is being routed to Output 1.
The unit is OFF and Input 2 was routed to Output 2 at the time power was turned
OFF:
S
X26
The X indicates that the unit is powered OFF. The 2 indicates Input 2 and the 6
indicates that Output 2 will display the source (at power ON).
21
Advertisement
Table of Contents
