Table of Contents
Advertisement
When removing the power cord, be sure to re-
move the power cord terminal correctly.
Pulling the power cord can damage it resulting
in a fire or an electric shock.
•@
Do not bring the set in a cooled state suddenly
into a warm room.
A high voltage may leak due to dew condensa-
tion resulting in a failure. In this case, use the
set after leaving it alone for 30 minutes.
Do not try to make transmission when the
transducer is not in water. Otherwise, the
transducer or transmitter may fail.
Do not try to make transmission when the
transducer is not connected, otherwise, the
transducer may fail.
When cleaning the surface, do not use any
organic solvent such as thinner or benzene.
Otherwise, the painting on the surface may be
damaged.
For cleaning the surface, remove the dust, then
wipe with clean dry cloth.
CAUTION
4
No!
Power
on
Not connected
Trans-
mit
Thinner
Advertisement
Table of Contents
