(5) Transducer Cable Wiring Procedure
1. Don't try to bundle the transducer cable with other cables. When this cable is
routed along with another cable, 50 cm minimum space must be provided between
the them.
2. The cable on the echo sounder transducer tends to pick up or generate noise, thus
it must not be bundled with the coaxial cable on the radio equipment.
3. It is recommended to route the transducer cable through iron pipe.
To the transducer
Low frequency side when the
single or dual frequency mode
is selected.
(75 kHz, 50 kHz, 38 kHz and 28
kHz)
HS21P-3
High frequency side when
the dual frequency mode is
selected.
Power Supply and Transducer Connectors Connection Diagram
13
Power connector
HS16P-4