JRC JFV-130HP Series Installation Manual page 45

Using an oil felt pen, delete 11
enter new characters to a nearby location.
The following is an example of the model name change done when you switch from
the single frequency CFT-220 to the dual frequency CFT-520.
‚b‚n‚k‚n‚q•@‚d‚b‚g‚n
MODEL
SERIAL NO.
JRC
4. Apply the master reset.
For this operation, refer to the "Implementing the Master Reset" in Section 4.3 in
page 46.
th th
and 12 characters (below example "‚j•– "), then
•@ ‚r‚n‚t‚m‚c‚d‚q
‚i‚e‚u•|‚P‚R‚O‚g‚o‚i
HD12345
JAPAN RADIO CO.LTD
Case of 7PCBS7016C
44
‚j•– ‚a
‚j‚l