Receiver Unit Descriptions - Gefen EXT-HDMI 1.3-CAT5-ELR User Manual

1 IR
This IR sensor receives signals from the Hi-Def source IR remote control. The
IR signals are sent back to the source device, when using an IR Blaster on the
Sender.
2 HDMI Out
Connect a locking HDMI cable from this port to an HDTV display.
3 Power
This LED will glow bright red once the included 5V DC locking power supply
has been properly connected to the unit and the locking power supply has been
connected to an available wall outlet.
4 5V DC
Connect the included 5V DC locking power supply to this connector. Only use
the power supply shipped with this unit.
5 Ext IR
Connect an IR Extender (Gefen part no. EXT-RMT-EXTIR) cable from this port
to the Hi-Def source to extend the IR control.
6 Ethernet
Connects the receiver unit to the network device.
7 Link
Connects the Receiver unit to the Sender unit using CAT-5 cabling.

RECEIVER UNIT DESCRIPTIONS

7